Uprights
come in several different styles and sizes. If your application
requires hang-on accessories, such as lighting, shelving or even
an overhead tool troly application, WSI has the upright for you.
We can also interconnect electrical and air within the upright.
C2
Split Shelf Unit (right); Should your application require
a tall working area on oneside coupled with multiple shelving
needs, the split shelf unit provides just that. Add as many 1/2
shelves, or other accessories, to either side and ergonomically
position the shelves to work best for you. Mount shelves side
by side to create one full length shelf. C2's come standard with
on 24" high slotted rectangular frame.
PB
Split shelf upright (left) provides multiple shelving
and/or hang-on accessories where needed. Add as many shelves,
electrical channels or parts cup rails etc. to either side. Slotted
split shelf units are 48" high and come with a top cross
bar for side to side stability. The slotted uprights mount directly
to the work bench frame insuring maximum pull strength. Slots
are on one inch increments. Standard equipment include three 48"
slotte upright and one cross.
Slotted
Uprights (right), the tradiotional standard for assembly
work benches. The slotted upright unit mounts directly to the
frame insuring the maximum pulling strength possible. Uprights
are 48" high and are slotted in one inch increments. A cross
bar is used to increase side to side stability. Come standard
with two uprights and one cross bar.
"Add
an upright" (left) to any existing work bench. This
slotted upright bolts directly to the work surface. The heavy
duty mountain bracket wraps around the work surface and is bolted
from underneath the work surface. Lights, shelves and other hang-on
accessories are optional. Uprights are 48" high and are slotted
in one inch increments. Comes standard with two 48" slotted
uprights an one crossbar.
Light
support upright (right) mounts directly to the rear of
the instrument shelf. The heavy duty mounting bracket wraps around
the instrument shelf and is bolted from underneath. The upright
is 24" high and is slotted in inch increments. The light
bracket channel extends out 24" and allows the light fixture
or tool trolley to adjust in/out with ease.
Tool Trolley
upright (left) mounts directly to the rear of the work surface
using a heavy duty mounting bracket. The mounting bracket wraps
around the work surface and is bolted from underneath. The upright
is 48" high. The arm extension is 24" and allows the
tool trolley to adjust in/out with ease.
C2 Uprights
(right) are available single sided or double sided and are 72"
high. This allows in-line configured benches to be reconfigured
as stand alone benches. An upright will be needed with the adder
bench. When ordering, please specify 30" or 36" worksurface
and single sided or double sided. |
